Enerdrive B-TEC 12V 300Ah LiFePO4 Battery Gen2

The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.

The Enerdrive Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

•     Battery Capacity
•     Battery Voltage
•     Battery Current (Amps)
•     Battery State of Charge (SOC)
•     Battery State of Health (SOH)
•     Battery Status
•     Individual Cell Voltage
•     Battery Temperature
•     Battery Cycles
•     Battery Alarms
•     Battery Event Information

Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

• Nominal Voltage: 12.8V
• Nominal Capacity: 300Ah
• Cycle Life (DOD – 80% under controlled conditions): ≥ 2000 Cycles

• Battery Charge Temperature: 0 ̴ 45°C
• Normal Charge Voltage CV/CC*: 14.40 ̴ 14.60V
• Standby (Float) Voltage: 13.50 ̴ 13.80V
• Maximum Charge Current: 190A @ 25°C for 30mins
• Recommended Charge Current for Maximum Life: 20-50A